Residential ยท Smart Lock Installation
Going keyless? Smart lock installation at your door
A keypad or app lock in place of the old one? Across 12 Mid-Missouri counties.
- Safes
- Patio door latches
- Deadbolts
- Knob & lever sets
- Smart locks
- Keypad locks
Smart Lock Installation
Smart Lock Installation, step by step.
What this covers
Smart lock installation covers the keypad lock on your house door or business door, and app-controlled locks on the same kind of door. We fit the outside keypad, the inside thumbturn, and the part that reads the code or phone command. You can replace a worn deadbolt setup with a keypad model, or add a connected lock where the key no longer does all the work. We handle the lock at the door, the key slot, and the trim ring around it.
How the work goes
Each job starts with the door cutout, the faceplate, and the latch already in place. A house door with a plain round bore calls for different fitting than a business door with a rim or mortise body. We match the lock body, the keypad, and the inside turn piece to the opening. The work changes with the old latch, the screw holes, and whether the app lock needs battery access or a cleaner fit against the door.
Where it stops
We do not handle home automation or Wi-Fi setup. Our work stops at the smart lock, the keypad, and the app control on the door. If you want other connected devices tied together, that is outside this service. We stay with the lock body, the key slot, and the inside thumbturn on the door.
What it covers
What smart lock installation covers
Keypad locks for house and business doors, app-controlled locks.
Worth knowing
Before you call about smart lock installation
A business door changes the layout around the lock. You may be looking at a narrow metal stile, a storefront pull, and a closer above the glass. We set the keypad unit or app-controlled trim to fit that body, then match the cylinder and mounting holes to the existing deadlatch or mortise case. A house door usually gives more wood around the bore. On a business door, the latch parts sit tighter together, and the keypad has to clear the handle and closer arm.
The face of a business door can change the feel of the job, too. A metal door often has a thinner edge and a different backset than a wood front door. We check the latch case, the keyed cylinder, and the outside trim before setting the keypad. On a rim lock, the housing sits on the inside face and the keyway stays in a fixed spot. On a bored cylindrical set, the keypad body and dead latch need room around the knob or lever.
An app-controlled lock on a business door also means dealing with more than the deadbolt alone. The door may already have a mortise lock, a lever handle, or a separate closer that pushes the latch hard against the strike. We fit the smart lock parts around those pieces and check the outside keypad, the inside thumbturn, and the battery cover so they clear the door face. A house door usually has a simpler bore. A business door asks for a closer look at the latch, the trim, and the keyway.
FAQ
Smart Lock Installation questions
How do I know if my door can take a smart lock, and what should I tell you before you come out?
A door with a standard bore or a rim lock is often a fit for a keypad or app-controlled lock. Tell us if the dead latch sits above or below the knob, and if the inside trim is tight to the glass or a narrow panel. We look at the latch, the inside thumb turn, and the hole pattern first.
Do I need to know my current lock brand before asking about a smart lock?
No, you do not need the brand name. If you can see a round knob, a lever, or a thumb turn, that helps. Tell us whether there is one keyhole or a separate latch above it, and whether the inside side has a thumb turn or a small turn piece. That changes which trim and strike area we inspect first.
Can you install a smart lock on a business door with a key pad I can use every day?
Yes, we can fit keypad locks on many business doors with a round bore or a rim setup. We look first at the latch, the outside trim, and the inside turn piece, since those parts decide what fits cleanly. If the door has a worn key slot or loose faceplate, that matters too.
What should I check on my door before I ask about an app-controlled lock?
Check whether the edge latch sits straight in the hole and whether the inside side has enough room for a battery case or a keypad body. Tell us if the door is wood, metal, or a narrow storefront style, and if the existing keyhole is centered or offset. That helps us look at the faceplate and inside trim first.
Related services
More residential services
Where
Smart Lock Installation across Mid-Missouri
Boone County
- Rocheport
- Huntsdale
- Hallsville
- Harrisburg
- Columbia
- Pierpont
- Ashland
- Hartsburg
- McBaine
- Centralia
- Sturgeon
Cole County
Callaway County
Randolph County
Audrain County
Miller County
Cooper County
Macon County
Moniteau County
Chariton County
Howard County
Osage County
Coverage